HWC

Heater hose bracket - 68 and earlier Non-A/C Big Block and Hemi

Heater hose bracket - 68 and earlier Non-A/C Big Block and Hemi. Mounts to the alternator triangle support bracket. Made in USA.

Heater hose bracket - 69-up Non-A/C Big Block and Hemi

Heater hose bracket - 69-up Non-A/C Big Block and Hemi. Mounts to the alternator triangle support bracket. Made in USA.

Heater hose bracket - Some 67 and all 68 big block with AC and some non-AC. Also fits big block A Body

Heater hose bracket - Some 67 and all 68 big block with AC and some non-AC applications. Also fits big block A Body. Fastens into tabs on RH valve cover. 4.75 tall. Made in USA.

Heater hose bracket - Some 67 and all 68 non-AC big block

Heater hose bracket - Some 67 and all 68 non-AC big block applications. Fastens into tabs on RH valve cover. 2 tall. Made in USA.

Heater Hose Tie Strap - 1960-1978

Heater Hose Tie Strap - 1960-1978 . Used to strap heater hose to A/C line on right side of engine or just the heater hoses together. 2 used per vehicle. Made in USA.

Ignition wire bracket 69-74 Big Block

Ignition wire bracket for 69-74 Big Block. Mounts under right thermostat housing bolt. Made in USA.

Ignition wire insulator - 273/Big Block/Hemi

Ignition wire insulator - 273/Big Block/Hemi. Made in USA.

Ignition wire insulator - 4-Position used on 1969 and later Big Block Mopar

Ignition wire insulator - 4-Position used on 1969 and later Big Block engines to insulate the ignition wires from wire routing brackets. Made in USA.

Oil filter adapter kit for LA small block Mopar engines

Oil filter adapter kit for LA small block engines (NOT Magnum blocks). Includes adapter plate - gasket - and filter adapter fitting. Replacement for 2402103 / 1557575 / 2206372. Made in USA.

Parking Brake Cable Clip

Parking Brake Cable Clip. Used on the RH cable to axle housing on Dana cars. Also used for LH cable to car body. Replacement for 2534931.

Parking Brake Handle for 68-74 A-Body

Parking Brake Handle for 68-74 A-Body. Replacement for 2823549. Made in USA.

Plug wire bracket - Big Block HP C-Body/Big Block A-Body/applications where number 7 cylinder wire runs over the valve cover

Plug wire bracket - Big Block C-Body with HP - Big Block A-Body - and applications where number 7 cylinder wire runs over the valve cover. Made in USA.