Quick view sku: FG67A 1970-1974 E-Body - 5/16 inch stainless fuel tank sending unit 1970-1974 E-Body - 5/16 inch stainless fuel tank sending unit with lock ring - seal - strainer. Fits 1970-1974 Dodge Challenger and 1970-1974 Plymouth Barracuda/Cuda. MSRP: Now: $54.95 Add to Cart Quick view sku: LO06 Chrysler Sending Unit Retaining Ring/Gasket Pkg Chrysler Sending Unit Retaining Ring/Gasket Pkg. MSRP: Now: $4.99 Out of stock Quick view sku: FG-FLOAT Sending Unit Float (brass) Sending Unit Float (brass) MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS-L Sending Unit Ground Strap for 70-up A-Body/71-74 B-Body/E-Body - long 7.5in style Sending Unit Ground Strap for all 70-up A Body - 1971-1974 B and E Bodies used a longer version of this strap. This strap is 7.5 long. MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS Sending Unit Ground Strap for all 1964-1978 Mopar cars - short 3.75in style Sending Unit Ground Strap for all 1964-1978 Mopar cars (except 76-78 Aspen/Volare/LeBaron/Omni). Replacement for factory 2258862 which shows up in the factory parts catalog for all of these years MSRP: Now: $9.99 Add to Cart Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: LO06 Chrysler Sending Unit Retaining Ring/Gasket Pkg Chrysler Sending Unit Retaining Ring/Gasket Pkg. MSRP: Now: $4.99 Out of stock Quick view sku: FG-FLOAT Sending Unit Float (brass) Sending Unit Float (brass) MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS-L Sending Unit Ground Strap for 70-up A-Body/71-74 B-Body/E-Body - long 7.5in style Sending Unit Ground Strap for all 70-up A Body - 1971-1974 B and E Bodies used a longer version of this strap. This strap is 7.5 long. MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS Sending Unit Ground Strap for all 1964-1978 Mopar cars - short 3.75in style Sending Unit Ground Strap for all 1964-1978 Mopar cars (except 76-78 Aspen/Volare/LeBaron/Omni). Replacement for factory 2258862 which shows up in the factory parts catalog for all of these years MSRP: Now: $9.99 Add to Cart Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: FG-FLOAT Sending Unit Float (brass) Sending Unit Float (brass) MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS-L Sending Unit Ground Strap for 70-up A-Body/71-74 B-Body/E-Body - long 7.5in style Sending Unit Ground Strap for all 70-up A Body - 1971-1974 B and E Bodies used a longer version of this strap. This strap is 7.5 long. MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS Sending Unit Ground Strap for all 1964-1978 Mopar cars - short 3.75in style Sending Unit Ground Strap for all 1964-1978 Mopar cars (except 76-78 Aspen/Volare/LeBaron/Omni). Replacement for factory 2258862 which shows up in the factory parts catalog for all of these years MSRP: Now: $9.99 Add to Cart Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: SUGS-L Sending Unit Ground Strap for 70-up A-Body/71-74 B-Body/E-Body - long 7.5in style Sending Unit Ground Strap for all 70-up A Body - 1971-1974 B and E Bodies used a longer version of this strap. This strap is 7.5 long. MSRP: Now: $9.99 Add to Cart Quick view sku: SUGS Sending Unit Ground Strap for all 1964-1978 Mopar cars - short 3.75in style Sending Unit Ground Strap for all 1964-1978 Mopar cars (except 76-78 Aspen/Volare/LeBaron/Omni). Replacement for factory 2258862 which shows up in the factory parts catalog for all of these years MSRP: Now: $9.99 Add to Cart Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: SUGS Sending Unit Ground Strap for all 1964-1978 Mopar cars - short 3.75in style Sending Unit Ground Strap for all 1964-1978 Mopar cars (except 76-78 Aspen/Volare/LeBaron/Omni). Replacement for factory 2258862 which shows up in the factory parts catalog for all of these years MSRP: Now: $9.99 Add to Cart Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: VSEP Fuel vapor separator - 1968-1971 440 and 426 Hemi Fuel vapor separator - 1968-1971 440 and 426 Hemi. This unit has the correct internal tube configuration lengths unlike some of them on the market. Fuel inlet tube length is 2.5. Fuel outlet and return tube lengths are 3. Metered return orifice is... MSRP: Now: $54.95 Add to Cart Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: GC-CUDA Gas cap (vented) for 70 Cuda and all with repop filler necks Gas cap (vented) for 70 Cuda and for use with filler neck FTN-7074CUDA MSRP: Now: $19.95 Add to Cart Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: GC-VLK Gas cap (locking vented) for 70-74 Challenger/68-70 B-Body (except Charger)/post May 71-74 Cuda/73-74 B-Body Gas cap (locking vented) for 70-74 Challenger with flip top cap - 68-70 B-Body (except Charger) - post May 71-74 Cuda - and 73-74 B-Body. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: GC-E2P Gas cap for 72-74 Challenger (primed) - Also fits ALL versions of the reproduction filler necks Gas cap for 72-74 Challenger (primed). Also fits ALL versions of the reproduction filler necks. MSRP: Now: $29.95 Add to Cart Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: GC-E1P Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only Gas cap for 70-71 Challenger (primed) - for ORIGINAL filler necks only. Will not fit any reproduction filler necks. MSRP: Now: $29.95 Out of stock Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view sku: GC-CHAL-NV Non vented gas cap for Challengers (under flip top) Non vented gas cap for Challengers. Used under flip top caps. Fits 1970 Challengers using original filler necks or any year using a reproduction filler neck both vented and non vented. Backside tangs are the wider 3/8. MSRP: Now: $19.95 Add to Cart Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected
Quick view sku: GC-EFT-BEZ Flip top gas cap bezel for 70-74 Challenger Flip top gas cap bezel for 70-74 Challenger. Replacement for 3404666. MSRP: Now: $24.95 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected