C-Body

1957-1959 Mopar Car - 5/16 inch fuel tank sending unit (120-10Ohms)

1957-1959 Mopar Car sender - 5/16 inch fuel tank sending unit with lock ring - seal - and strainer. This unit reads 120ohms empty and 10ohms full.

Concours correct fan clutch unit for B/C/E Body - 67-71 Hemi and Big Block w/o AC

Concours correct fan clutch unit for 67-71 Hemi and Big Block w/o AC. Also 70 340 w/o AC. Fits B/C and E bodies. Replacement for 2806070.

Throttle Return Spring Bracket - 1965-1966 Big Block 4-barrel for both A/C and Non-A/C Applications (2536835)

Throttle Return Spring Bracket - 1965-1966 Big Block 4-barrel for both A/C and Non-A/C Applications (2536835). Made in USA.

Throttle Return Spring Bracket - 1967-1968 Big Block 4bbl applications with AC (2806452)

Throttle Return Spring Bracket - 1967-1968 Big Block 4bbl applications with AC (2806452). Made in USA.

Oil filter adapter kit for LA small block Mopar engines

Oil filter adapter kit for LA small block engines (NOT Magnum blocks). Includes adapter plate - gasket - and filter adapter fitting. Replacement for 2402103 / 1557575 / 2206372. Made in USA.

Crankshaft Oil Slinger for Mopars - Small block / Big Block / Hemi

Crankshaft oil slinger for Mopars (small block / big block / hemi). Made in USA.

Rear window trim clip/screw kit - 68 C-Body 2dr hardtop WITHOUT vinyl top

Rear window trim clip/screw kit for the following 68 C-Body Mopars 68 Dodge Polara/Monaco 2dr without Vinyl top 68 Chrysler Newport/New Yorker/300 2dr hardtop without Vinyl top 68 Plymouth 2dr VIP/Sport Fury Fast top without Vinyl top

Coil mounting bracket for 67-79 small block mopars

Coil mounting bracket for 67-79 small block. Replacement for 2642670. Made in USA.

Big Block Plug Wire Shield -67-69 Big Block HP. Made in USA.

Big Block Plug Wire Shield -67-69 Big Block HP - Bolts under the 6th and 7th head bolt to protect 6 and 8 plug wire boots. A 2nd one is required on HP C-Body and Big Block A-Body for number 5 and 7 plug wire boots. Made in USA.

Big Block Plug Wire Shield - mid-69 and later Big Block HP. Made in USA.

Big Block Plug Wire Shield - Big Block Plug Wire Shield - mid-69 and later Big Block HP - This spark plug shield bolts under the sixth and seventh head bolt to protect number 6 and number 8 spark plug wire boots. Made in USA.

Vacuum fitting - 3/8 NPT with 1/8in vacuum port

Intake Vacuum Hose Fitting - 3/8 NPT with 1/8in vacuum port for cars w/o power brakes that have either AC or Air Grabber. Also 60-65 cars for heater control vacuum w/o power brakes. Replacement for 1858955 and 2863486.

Heater Hose Nipple for 1/2in hose - 3/8 NPT - 2in Overall length

Heater Hose Nipple for 1/2in hose - 3/8 NPT - 2in Overall length.  Fits 69 C-Body big block and early 70 applications when the 3/8NPT 69 water pump housings were used. Also for aftermarket 70-up small block intakes needing 1/2" hose connections...