Ignition wire bracket 69-74 Big Block

Ignition wire bracket for 69-74 Big Block. Mounts under right thermostat housing bolt. Made in USA.

Ignition wire insulator - 273/Big Block/Hemi

Ignition wire insulator - 273/Big Block/Hemi. Made in USA.

Big Block Plug Wire Shield - mid-69 and later Big Block HP. Made in USA.

Big Block Plug Wire Shield - Big Block Plug Wire Shield - mid-69 and later Big Block HP - This spark plug shield bolts under the sixth and seventh head bolt to protect number 6 and number 8 spark plug wire boots. Made in USA.

Big Block Plug Wire Shield - mid-69 and later B/E Body Big Block HP. Made in USA.

Big Block Plug Wire Shield - mid-69 and later B/E Body Big Block HP - Bolts to the fourth HP exhaust manifold stud from the front to protect number 7 spark plug wire boot. Made in USA.

1970-71 Big Block Complete Spark Plug Bracket Kit

1970-71 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

Plug wire bracket - Big Blocks

Plug wire bracket - Big Blocks require 2. One bolts under the right side head bolt between cylinder #2 & #4 spark plug which holds #4 & #6 cylinder ignition wires. A second will bolt under the left side head bolt between cylinder #1 & #3 spark plug to...

69-71 Hemi Ignition Wire Separator Bracket (oval air cleaner and shaker)

69-71 Hemi Ignition Wire Separator Bracket (oval air cleaner and shaker). Bolts to front throttle return spring bracket bolt and faces forward. Made in USA.

66-70 Hemi Ignition Left Wire Separator Bracket (round air cleaner only)

66-70 Hemi Ignition Left Wire Separator Bracket (round air cleaner only). Bolts to front throttle return spring bracket bolt and faces forward. Made in USA.

66-70 Hemi Ignition Wire Separator Bracket (round air cleaner only)

66-70 Hemi Ignition Wire Separator Bracket (round air cleaner only). Bolts to upper coil bracket bolt and faces forward. Made in USA.

Ignition wire insulator - 4-Position used on 1969 and later Big Block Mopar

Ignition wire insulator - 4-Position used on 1969 and later Big Block engines to insulate the ignition wires from wire routing brackets. Made in USA.