Ignition wire bracket 69-74 Big Block

Ignition wire bracket for 69-74 Big Block. Mounts under right thermostat housing bolt. Made in USA.

Ignition wire insulator - 273/Big Block/Hemi

Ignition wire insulator - 273/Big Block/Hemi. Made in USA.

Big Block Plug Wire Shield -67-69 Big Block HP. Made in USA.

Big Block Plug Wire Shield -67-69 Big Block HP - Bolts under the 6th and 7th head bolt to protect 6 and 8 plug wire boots. A 2nd one is required on HP C-Body and Big Block A-Body for number 5 and 7 plug wire boots. Made in USA.

Big Block Plug Wire Shield - mid-69 and later Big Block HP. Made in USA.

Big Block Plug Wire Shield - Big Block Plug Wire Shield - mid-69 and later Big Block HP - This spark plug shield bolts under the sixth and seventh head bolt to protect number 6 and number 8 spark plug wire boots. Made in USA.

1972-78 Big Block Complete Spark Plug Bracket Kit

1972-78 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

1970-71 Big Block Complete Spark Plug Bracket Kit

1970-71 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

1969 Big Block Complete Spark Plug Bracket Kit

1969 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

1968 Big Block Complete Spark Plug Bracket Kit

1968 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

1966-67 Big Block Complete Spark Plug Bracket Kit

1966-67 Big Block Complete Spark Plug Bracket Kit. WS-K bracket also required if used for C-Body applications. Made in USA.

Plug wire bracket - Big Blocks

Plug wire bracket - Big Blocks require 2. One bolts under the right side head bolt between cylinder #2 & #4 spark plug which holds #4 & #6 cylinder ignition wires. A second will bolt under the left side head bolt between cylinder #1 & #3 spark plug to...

Plug wire bracket - Big Block HP C-Body/Big Block A-Body/applications where number 7 cylinder wire runs over the valve cover

Plug wire bracket - Big Block C-Body with HP - Big Block A-Body - and applications where number 7 cylinder wire runs over the valve cover. Made in USA.

Ignition wire insulator - 4-Position used on 1969 and later Big Block Mopar

Ignition wire insulator - 4-Position used on 1969 and later Big Block engines to insulate the ignition wires from wire routing brackets. Made in USA.